1 to 2 HDMI Extender Splitter 1080p Over 50m Ethernet with 2 Local Output H72337

1 to 2 HDMI Extender Splitter 1080p Over 50m Ethernet with 2 Local Output H72337

Sale price  $12.99 Regular price $63.06
Skip to product information
1 to 2 HDMI Extender Splitter 1080p Over 50m Ethernet with 2 Local Output H72337

1 to 2 HDMI Extender Splitter 1080p Over 50m Ethernet with 2 Local Output H72337

Sale price  $12.99 Regular price $63.06
Shipping calculated at checkout.

Split One HDMI Signal into 2 identical Signals and run up to 50 Meters through the Ethernet cable, ideal as a remote audio/video extender.
HDMI Over Ethernet - Suggested length: Cat6/7---50 m/165 ft, Cat5e---40 m/130 ft, Cat5-30 m/100 ft.
Uncompressed 1080P@60Hz to 1080P@60Hz Full HD video remote expansion, easy to work in churches, clubs, bars, conference halls, video resolution is backward compatible with 1080i/720p devices and hosts.
HDMI Extender with 2 HDMI local outputs, connected to local monitors, very suitable for local extended screen settings.
Simpler Setup - Just connect a power adapter to the transmitter and it will start the device.

HDMI EXTENDER ONE IN TWO OUT

Change the mode of audio and video signals for longer distance transmission, HDMI IN --- CAT X --- HDMI OUT. 2-channel simultaneous transmission.

Specifications:

1.Video

- Standards---HDMI 1.3; HDCP1.2

- Maximum pixel clock---165MHz

- Maximum data rate---6.75Gbps

- Resolution---1920X1080@60Hz, 3D

- Connector---HDMI-A

2.Ethernet

- Interface---RJ45

- Recommended length---CAT6--50m/165ft; CAT5E--40m/130ft; CAT5--30m/100ft. There may be no image if the length is too short(1~10ft), please try another longer cable.

3.Others

- Power supply---Input: 110~220V; Output: 12V

- Power dissipation---MAX 12W

- Temperature---Operating: -5℃ ~ +70℃

- Humidity---Operating: 5% ~ 90%

- Dimension---TX:110*62*23mm/RX:81*45*23mm

4. Packing list

- HDMI transmitter---1 pcs

- HDMI receiver---2 pcs

- Power adapter---1 pcs

- User manual---1 pcs

About EDID

When the EDID cannot automatically identify the monitor parameters, the image may not be displayed, please perform the following steps.

(1) Connect the monitor to the HDMI IN on transmitter.

(2) Connect the power supply to transmitter.

(3) Press and hold the EDID button for 3-5 seconds. The green light on transmitter side stops flashing, indicating EDID copy is complete.


Electronics Accessories & Supplies Audio & Video Accessories

You may also like